SOLUBLE OIL is a mineral oil that can combine with water and adhere well to metal surfaces while machining. Its main feature is that it has the ability to dissipate heat that occurs during cutting well due to the presence of water as an ingredient and properties. This cooling issue will make the tooling used for machining have a longer toollife, which is a great cost reduction.
Milky cooling oil
Properties of milk coolant
Milk-type coolant has the ability to reduce heat in tooling, CNC lathe work, and CNC milling center work that is caused by machining between metal and tooling. Milk-type coolant has the property of cooling the heat that occurs. Makes the tooling not chipped or damaged. Prolongs tool life, increases tool life, prolongs tool life. Using milk-type coolant is a great way to reduce production costs because tooling is a consumable material that is quite expensive. quite And milk-type coolant will not cause rust on machines and fittings, various joints, including all types of metal of machines, and will not leave stains on the workpiece.
Using milk coolant
Correct use of milk coolant Must be mixed with water at a ratio of 1: 20, that is, 1 liter of milk coolant mixed with 19 liters of water, or equivalent to a 5% milk coolant mix ratio. Pouring and mixing the right milk coolant. must We must prepare 19 liters of water in a tank and prepare 1 liter of milky cooling oil. Then pour the milky cooling oil into the water by raising it about 1 meter above the water tank, pouring it in a stream. Doing this will cause the milk to break down. A process called Booming occurs that will mix well and efficiently with water.
Coolant Semi-synthetic type
The properties of semi-synthetic coolant oil are not rotten or smelly.
Semi-synthetic coolant does not rot and does not stink. It has the ability to reduce heat in tooling, CNC lathe work, and milling machine center CNC work that occurs from machining between metal and tooling. Semi-synthetic coolant does not rot and does not stink. Foul has a cooling property that causes the tooling to not chip or crack. This makes it possible to extend the life of the tooling. It increases the tool life even more, prolonging the life of the tooling. Using semi-synthetic coolant that does not rot or stinks is therefore a great way to reduce production costs because tooling is classified as a consumable material. That is quite expensive. And the semi-synthetic coolant does not rot, does not stink, will not cause rust on machines and fittings, including all types of metal of machines, and will not leave stains on the workpiece.
Using semi-synthetic cooling oil does not rot or stink.
Correct use of semi-synthetic coolant that does not rot and does not stink. Must be mixed with water in a ratio of 1: 20, that is, 1 liter of non-rotting, non-smelling semi-synthetic coolant mixed with 19 liters of water, or equivalent to a 5% mixture of non-rotting and non-smelling semi-synthetic coolant. Mixing the correct semi-synthetic coolant with a non-rotting, non-stinky coolant is a must. We must prepare 19 liters of water in a tank and prepare 1 liter of semi-synthetic cooling oil that does not rot and does not stink. Then pour in the semi-synthetic coolant that does not rot and does not stink. Into the water by raising it about 1 meter above the empty water tank by pouring it into a stream. Doing this will make the semi-synthetic coolant oil not rotten or smell bad. A process called Booming occurs that will mix well and efficiently with water.
Coolant Pure oil type
Properties of pure oil cooling oils
Pure oil cooling oil has the ability to reduce heat in tooling, CNC lathe work, and milling machine center CNC work that occurs from machining between metal and tooling. Pure oil cooling oil has cooling properties that occurs, resulting in the tooling not being chipped or damaged. This makes it possible to extend the life of Tooling. It makes it possible to increase Tool life even more. Extends the life of Tooling. Using pure oil-type coolant is a great way to reduce production costs because Tooling is considered a consumable material that is quite expensive. Quite tall And pure oil-type coolant will not cause rust on machines and fittings, various joints, including all types of metal of machines, and will not leave stains on the workpiece. And because it is oil, it makes the metal surfaces that are machined have a shiny, beautiful surface because some types of work require relatively high surface smoothness, for which pure oils are very suitable.
Use of pure oil cooling oil
The correct use of pure oil cooling oil is Very convenient because there is no need to mix with water. Just keep adding it so that the level of pure oil coolant does not drop from the tank of a CNC lathe or machine center. Another advantage of pure oil coolant is that It doesn’t rot, doesn’t smell bad, and pure oil-type coolant doesn’t cause rust on the machinery either.